Operation method of double-wing drop test machine

At present, there are two types of drop test devices used in the industry: single-wing drop test machine and double-wing drop test machine. Now we introduce the operation method of the double-wing drop test machine as follows.

1.First connect the supplied power cable to the three-phase power supply and ground it.Connect the control box and the testing machine with the connection cable provided with the plug according to the plug adaption situation, and test the up / down command.

2.Turn on the power of the host, set the height required for the test, and press the up button to reach the set height; if it stops in the middle, you must make it reach the set height before executing the reverse operation command;

3. Place the measured object on the work surface, and then fix it with the fixing rod;

4. Press the up key to raise the measured object to the set height;

5. Press the drop button to make the work surface instantly disengage from the measured object, and the measured object will do free fall motion;

6. Press the reset button to restore the workbench to working state;

7. If the test is repeated, repeat the above steps;

8. After the experiment, press the lower button to make the worktable work to the lowest position and turn off the power button.

We have many different kinds of Round Mascara Tube and Square Mascara Tube. We also have plastic Mascara Bottle and aluminium Mascara Tube .And we can make the container with any other mascara brush.

We promise out standing service tailored to meet your demands. Our products are favored by many customers all over the world and are sold in Europe, North America, South America and Asia.
We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Lipstick Case with good services for you !

Mascara Tube

Mascara Tube, Mascara Container, Mascara Case,Mascara Bottle

ims Packaging Limited , https://www.ims-cosmetic-packaging.com