At present, there are nearly a thousand enterprises producing thermal transfer equipment in China, but there are probably dozens of those with actual production capacity. Originally, there was no special technical secret for this device. Because this device is hooked to the transfer, and it is suitable for opening a shop to make personal images, it was deliberately cast a mist.
As for what generation of equipment and what, most of them are changes made by various manufacturers to reduce costs or change device suppliers. The improvement in performance does not mean that there must be no, but it is not related to the name of the generation of equipment. of. So if a company talks about the 6th generation equipment must be better than the 1st generation, it has no practical significance. It is more accurate to say that the sales ideas are not directly related to the technology and the user's use effect.
The author will give you a comprehensive introduction to the basic knowledge of thermal transfer technology equipment (the tablet products introduced do not include industrial-use tablet machines, that is, tablet machines with a plane area of ​​not more than 40cm * 60cm).
1. Basic principle of equipment
1. From the principle of sublimation transfer, each thermal transfer device is a heating element with a different shape, and the temperature of the heating element is controlled within a range through an additional temperature controller. At the same time, in order to conveniently control the time of sublimation and transfer, a time controller is added to remind the user when the set time is reached.
2. In terms of circuit principle, the thermal transfer device is a temperature controller and a time controller that jointly control an electric heating device. Both the temperature and the time can be set in advance. The temperature of the electric heating device is stable at the set value, and the time will also be After reaching the set value, the power is automatically cut off. Of course, this heating element is made into cylinders, square planes, round faces, round faces and other shapes according to the transfer of different products, so as to transfer different products.
Second, the classification of equipment
1. Different products according to transfer: divided into roasting cap machine, baking pan machine, baking cup machine, tablet machine (as for the curved transfer machine and the universal transfer machine, there is no substantial difference, in fact, it is the oven, which is artificial Therefore, the name of Xuan Xuqi is obtained, so I will not introduce it here);
2. According to the time and temperature control mode: divided into analog control, semi-digital control, and dual digital control;
3. Among them, the tablet machine is the most versatile and the most widely used. Not only for personal transfer, but also in the garment factory, gift factory, and heat transfer industry, this machine is widely used, so the tablet machine is manufactured in addition to a variety of structures Meet different needs. It is further divided into: ordinary direct pressure tablet machine, high pressure direct pressure tablet machine, ordinary shaking machine (because the pressure is not as high as the high pressure machine, the cost is high, and it is not practical and rare), Korean shaking machine (using bias bearings, transfer When the pressure can be very high).
4. In addition, it is an all-in-one transfer device. Common ones are 3 in 1 (tablet, baking cup, baking tray), 4 in 1 (tablet, baking cup, baking tray, baking cap), and more in one Devices, such as 9-in-1 and even 12-in-1, are often flashy. For example, adding a baking coaster with different diameters, even adding a set of pressure badges, etc., and also adding an ultraviolet lamp to solidify the crystal. However, in terms of actual use, too much unity is very inconvenient in use. Generally, the all-in-one machine has an advantage when the rent is very expensive and the area is limited. If it is not the area limit, the all-in-one machine is very troublesome when transferring different products because of the need to replace parts repeatedly. .
1. High-strength steel body, more stable
2. Precision feed platform, a stable paper transport, to ensure perfect print quality.
3. Suction feed platform, holding the paper during printing the same position;
4. industrial piezo printheads, high-precision, low noise, low wear, unattended printing operations;
5 .one brushless servo motor control technology, precise trails, eliminate broken;
6. Automatic cleaning ink stack lift, efficient and complete cleaning effect;
7. External drying device, make sure the ink dried instantaneously;
8. The user-friendly interface, easy to operate;
9. The dual power collecting system and damped discharge system to ensure stable and orderly receipt;
10. High-speed fiber-optic bi-directional communication, data transmission more efficient;
11.VSDT advanced variable droplet control technology and high fault feathering technology, to ensure that the fine reproduction of fine details.
Inkjet Printer,Durable Utility Inkjet Printer,Industrial Inkjet Printer,Print Type Inkjet Printer
KC Printing Machine (Group) Limited , http://www.kcautopm.com