The surface area of ​​the battery material is also very important. The specific surface area detection data of the negative electrode material of the battery is only true when the result is detected by the BET method. At present, the specific surface area test at home and abroad adopts the multi-point BET method, which is developed at home and abroad. The specific surface area measurement standards are based on the BET test method. Please refer to China's national standard (GB / T 19587-2004)-The method of measuring the specific surface area of ​​solid materials by the principle of gas adsorption BET. The measurement of specific surface area is actually a time-consuming task. Due to the different adsorption capacity of the sample, the test of some samples may take a whole day. If the test process is not fully automated, then the tester ca n’t leave at all times. A high degree of concentration, observing the instrument panel, manipulating the knob, and a little inattention will lead to the failure of the test process, which will waste a lot of precious time of the tester. Only truly fully automated intelligent specific surface area tester products can meet the international standards of the test instrument industry. All similar international products are fully automated. Manually operated instruments have long been eliminated abroad. A truly fully automated intelligent specific surface area analyzer product frees testers from repeated mechanical operations, greatly reducing their work intensity, training is simple, and working efficiency is improved. The truly fully automated intelligent specific surface area analyzer product greatly reduces errors caused by human operations and improves test accuracy. The F-Sorb 2400 specific surface area tester of Beijing Jine Spectrum Technology Co., Ltd. is an instrument that can truly realize the detection function of the BET method (both with direct comparison method), and more importantly, the F-Sorb 2400 specific surface area test of Beijing Jine Spectrum Technology Co., Ltd. The instrument is the only fully automated and intelligent specific surface area detection device in China so far. Its test results are highly consistent with international standards, and its stability is also very good. At the same time, it reduces human errors and improves the accuracy of test results. A battery is a device for energy conversion and storage. It converts chemical or physical energy into electrical energy through a reaction. A battery is a chemical power supply. It consists of two positive and negative electrodes with different active ingredients. The two electrodes are in contact with an electrolyte that can provide media conduction. When connected to an external carrier, the internal To provide energy. As an electrical storage device, when two metals (usually different in nature) are immersed in the electrolyte, they can conduct electricity and generate a certain electromotive force between the "polar plates". The magnitude (or voltage) of the electromotive force is related to the metal used, and the electromotive force of different types of batteries is also different.
The performance parameters of the battery mainly include electromotive force, capacity, specific energy and resistance. The electromotive force is equal to the work done by the non-static force (chemical force) of the battery when the unit positive charge moves from the negative electrode through the battery to the positive electrode. The electromotive force depends on the chemical nature of the electrode material and has nothing to do with the size of the battery. The total charge that the battery can output is the capacity of the battery, which is usually measured in ampere hours. In the battery reaction, the electrical energy produced by 1 kg of reaction material is called the theoretical specific energy of the battery. The actual specific energy of the battery is smaller than the theoretical specific energy. Because the reactants in the battery do not all follow the battery reaction, and the internal resistance of the battery also causes the electromotive force to drop, so batteries with high specific energy are often called high-energy batteries. The larger the area of ​​the battery, the smaller its internal resistance.
The energy storage of the battery is limited, and the total amount of charge that the battery can output is called its capacity, which is usually measured in ampere hours. It is also a performance parameter of the battery. The capacity of the battery is related to the amount of electrode material, that is, to the volume of the electrode.
Practical chemical batteries can be divided into two basic types: primary batteries and accumulators. The primary battery can produce current after it is made, but it is discarded after the discharge is completed. The storage battery is also called a secondary battery. It must be charged before use. After charging, it can be discharged and used. When the battery is charged, the electrical energy is converted into chemical energy; when it is discharged, the chemical energy is converted into electrical energy.
Our excellent quality colander is durable and will carry the weight of vegetables, fruits, cooked rice or pasta. We also have the color powder coating items for you to choose.
We are confident that you will love our product ,which one suitable for you,welcome to ask for the sample to check the quality.
Description of Stainless Steel Colander
Size:Dia 16/18/20/22/24cm
Material: Body :SS201/SS304/Iron
Finishing: Satin polishing ,Mirror Polishing ,Color painting ,powder coating
Logo: Laser logo, Etching logo, Silk printing logo, Embossed logo, Decal logo
MOQ : 2000 PCS
Packaging : White box, Mail box or Customized package
Sample Time : 7~10 days
Lead Time :60 days after have the deposit
Payment: T/T ,L/C or others
Payment term: 30% deposit before production and 70 % balance against the copy B/L
FAQ:
1:How can I get the sample?
We can provide the sample for customers to check the quality.
Please kindly provide the delivery info for calculate the sample cost. If you have DHL /TNT/UPS/FEDEX account, please also kindly provide it to us.
You can do the payment of sample via T/T and PayPal.
2:How about the sample time?
Usually the sample time is 7~10 days after have the sample cost.
3:How long will it take for mass production?
Usually 45~60 days after have the deposit.
4:Can we have our logo or company name to be printed on your products or the package?
Welcome OEM.
5:what certificate can you provide?
CE,CB,GS,FDA,LFGB,ROHS are available here.
6:How can we get your monthly new products announcement?
Please join our mailing lists.
Stainless Steel Colander
Metal Colander,Steel Colander,Stainless Colander,Stainless Steel Colander With Base
Jiangmen Wellway Houseware Co.,Ltd , https://www.wellwayhouseware.com