Faucet is the most common object in life, it greatly facilitates our lives and saves water. How to buy a good faucet when we buy a faucet? In addition to selecting the faucet brand, we can also understand its structure and see how it works.
Today's faucets are more complex than ever, so we need to understand the structure and principles of the faucet to master and understand the structure of the faucet. The faucet structure diagram shows us all the components of the faucet so that we can understand it better. Otherwise, we don't even know what is inside the faucet.
We can see the structure of the basin is still very complicated, it is a single ceramic valve core surface, mainly by the handle, valve core, water inlet braided tube and installation of small accessories. It also includes some seals, screws and so on.
Ceramic valve works:
In general, the bottom of the ceramic valve plug consists of three holes. One of the two holes is used to enter and exit the cold water, the other is used to enter and exit the hot water, and the remaining one is used to discharge the water inside the valve plug.
The cold and hot holes of the faucet valve core have seal rings to ensure that the oblique street of the main body is in a sealed state. After the cold and hot water inlet pipes are connected, the hot water pipe and the cold water pipe line correspond to the two holes of the valve core. The spool mainly controls the opening and closing state of the two holes, relying on the movement of the ceramic plate to work. In places where the water quality is not so good, it is possible to filter the impurities by installing a filter, and also to prevent damage to the ceramic valve core caused by impurities. There are two installation positions for the filter: the inlet and the outlet.
Since there are many types and categories of faucets, the design of different classification faucets is very different, so the faucet structure diagram is completely different. Therefore, we must first understand the types of faucets. In general, the faucets we use in daily life are: single-joint faucets, double-faucet faucets, and triple-faucet faucets. According to the different handles, they can be divided into single handles. And double handle faucet. These different faucets are very different in the structure of the faucet, so we must first classify the class and then understand the relevant faucet structure. Let's briefly explain the bathtub faucet as an example.
Bathtub faucet
Bathtub faucets use the S shift to allow water to enter, but still have to enter the spool first and then the spool flows into the main body. The water enters the water hole on the left side of the commutator, and the commutator is used to open and close the water flow. The commutator achieves the switching function of the bubbler and the shower channel inside the main body through the cooperation of the seal ring and the main body. Note that in the commutator we see, the centerline must be symmetric, and if it is asymmetric, it will leak.
<\p><\div>
Cork Bulletin Board,Cork Board With Frame,Bulletin Cork Note Board,Aluminum Cork Board
Jiangyin Europtronic Stationery Co., Ltd. , https://www.youpuwhiteboard.com