Waste bottle and bottle cap utilization method collection

Clever use of waste bottles 1. Make a small watering can. Some beverage bottles are delicious and discarded. They can be used as a very practical watering can. When using a waste bottle as a small watering can, you only need to make some small holes in the bottom of the bottle.
2. Measuring cup. Some bottles (such as disposable bottles, etc.) are marked on the scale and can be used for scales as long as they are slightly processed.
3. Make clothing aroma. Use empty perfume bottles, make-up bottles, etc. Don't immediately throw away, open their lids, and put them in the trunk or closet, which will make the clothes become fragrant.
4. Simmer noodles. When picking up noodles, if you can't find the rolling pin for a while, use an empty glass bottle instead. It is also possible to make the hard surface soft by rubbing the noodles with a bottle filled with hot water.
5. In addition to wrinkles on the tie. A wrinkled tie can be hot and smooth without having to use an iron. It can be as smooth and beautiful as a curl. The tie will be wrapped in a cylindrical beer bottle. When the next morning is used, the original wrinkles will be eliminated.
6. Watch your watch. Cut the small plastic bottle and place the watch on it. Cut the shape of the watch with a ballpoint pen and cut it. Cut out the long hole through the strap and wear the strap out of the hole. Both ends pass through the column and are worn on the hand. It is smooth, sweat-proof and not easy to fall off.
7. Make a funnel. Use scissors to cut off the middle of the empty cola bottle. The upper part is a very practical funnel, and the lower part can be used as a cup.
8. Make chopsticks tube. The glass bottle is wrapped from the bottleneck with a ring of cotton yarn impregnated with alcohol or kerosene. When it is ignited and the flames are about to disappear, the bottle is placed in cold water, and the glass bottle is neatly cut. It is also very practical to use a lower half to make chopsticks.
9. Wind lights. Cut the bottom of the glass bottle and insert it into the lamp holder made of bamboo. There are a few vent holes in the base of the lamp holder, and a few notches in the bottom edge of the bamboo tube, so that the lamp is placed on the table and air can enter through the gap.
10. Make a gold fish tank. Thick glass jars can be made of goldfish bowls by chopsticks. Put a piece of rubber tube on the cork below, instead of goldfish, you can change the goldfish.
11. chandelier cover. Find a large, colorful bottle of empty bottles (such as brandy bottles, etc.) and cut the bottle to smooth it. Put the pendant and bulb in the bottle, drill a hole in the original cap, pass the wire, and screw on the cap. A 8 cm long colored plastic tube is placed over the bottleneck. Sticking a circle of gold sticker paper in the middle of the bottle becomes a beautiful chandelier.
12. System shampoo. A toothbrush can be made with a plastic bottle. Cut the bottle into two halves underneath its neck and use a pair of scissors to create a zig-zag shape (sawtooth cut as sharply as possible).

Clever use of caps 1. Cut ginger skin. The shape of ginger is uneven and its volume is small. It is very troublesome to remove ginger skin. You can cut ginger skin with a bottle of sparkling wine or a bottle around the lid, which is quick and convenient.
2. Scraping fish scales. Take a small round bar about 15 centimeters long, and screw 2 to 4 wine bottle caps at one end. Using the teeth on the face of the cap to scrape the fish scales is a good tool for scraping fish scales.
3. Use waste caps for decorations. The lid on the bottle is collected in a large glass bottle and placed in the dining room or living room. It is a very chic ornament.
4. Drills. If you want to drill a hole with a diameter of about 2 cm on soft wood or gray wall, you can use a bolt to fix a wine bottle cap, and then the bolt will be stuck on the drill head, and the cap can be in this "Show yourself" and play the role of a drill.
5. Handle. Some caps are very beautiful, you can use it as a drawer handle. First use steel to engrave a loop at the bottleneck, use an alcohol-filled cotton thread to hold the bottle at the nick, ignite the cotton thread, and immerse the bottle in cold water when the flame is about to be extinguished. The bottle can be cut off. With the appropriate bolts and eye sockets, the bottle mouth can be fixed on the drawer, and then the bottle cap can be screwed on the bottle mouth.
6. Make furniture slide well. Put a can lid under each leg of the furniture to slide the furniture.
7. Mat soap box. Placing the bottle cap in a soap box allows the soap not to come into contact with the water at the bottom of the box, which also saves soap.
8. Washing board. Collect the lids of some waste bottles (such as rubber caps on penicillin bottles, etc.), then criss-cross the rows, and place them in rows on a rectangular wooden board (the nails must be nailed in the recesses of the lid). A very practical washboard. Because of the elasticity of the rubber cover, the degree of wear of the clothes during washing is also lighter.
9. Protect the legs of the chair. When moving a chair on the floor, it often makes a harsh sound. To avoid this, place a cap (such as a rubber cap on the penicillin bottle) on the leg of the chair as a cushion so that it does not make harsh sounds and protect the legs of the chair.
10. The facade of the house. The useless glue lid is glued to the back of the door to prevent collision of the door when the door is opened and closed, and to protect the facade of the room.
11. Open the sewer dumplings. After the sewer scorpion was used for a long time, the wooden handle was detached from the rubber. In this case, you can find a bottle iron lid, screw the bottle cap fixed to the end of the handle, and then put on a plastic bowl can eliminate the phenomenon.
12. Itching. In the summer, mosquitoes bite and itchy. You can rub the lid of the thermos bottle on the mosquito bite for 2 seconds to 3 seconds, and then remove it. 2 or 3 times in a row. Severe itching will disappear immediately and no part will appear. erythema. The bottle cap is preferably a hot water bottle taken from a water temperature of about 90°C.
13. Keep flowers. Take a bottle cap and place it on the water outlet hole of the pot, which can not only make the water circulate but also prevent soil loss.
14. Clean the walls. Several vials are nailed onto a small wooden board to form a small iron brush, which can be used to scrape off the paper attached to the wall and the soil on the sole.