[ Chinese wardrobe network ] 1, the clothing of young couples is diversified.
Generally, the left and right sides are respectively set as the storage space for each of the men and women. The hangers in the cabinet are usually divided into two layers, the coat and the top, and the shirts can also be placed in separate small drawers or shelves, which are not wrinkled by the excessive laundry. Underwear, ties and socks can be used for special small plaids, which are good for clothing maintenance and more intuitive and convenient; sweaters can be placed in deep drawers; trousers are stored in special hangers.
Great reference value custom closet design experience and detailed installation process not satisfied
2, because the elderly stacked more clothes, fewer pendants.
Therefore, it is recommended to make more layers and drawers in the design. The position of the drawer that is often opened should not be designed too low, so as to avoid the inconvenience of the elderly.
The reference design experience and the detailed installation process are not acceptable.
3, the most important thing for children to design wardrobes is not to consider only the front;
Children's clothing is now more than the hanging clothes, but the child's growth is very fast, the change factor should be taken into account within 5 to 10 years, so the proportion of the stacking area and the hanging area is appropriate. important. Children's wardrobes are generally multi-functional, and children's articles such as toys, books, and clothing are placed by colleagues to achieve a multi-purpose cabinet. In addition, children's height factors should be considered. Children's commonly used items should be taken easily to avoid accidental injury. Do not design drawers and other accessories that can be pulled out at the height of the child's head to avoid accidents.
The reference design experience and the detailed installation process are not acceptable.
4. The height of the cabinet of the short coat or suit is not less than 800mm;
The height of the cabinet of the long coat is not less than 1300mm; the height of the drawer is not less than 150mm~200mm; as for the cabinet with stacked clothes, the width of the cabinet is between 330mm and 400mm. The height is not less than 350mm; the upper end of the whole wardrobe is usually set to place unused items such as quilts, and the height is not less than 400mm.
The reference design experience and the detailed installation process are not acceptable.
The reference design experience and the detailed installation process are not acceptable.
The reference design experience and the detailed installation process are not acceptable.
The reference design experience and the detailed installation process are not acceptable.
Detailed explanation of the whole process of wardrobe installation
Customized wardrobe installation seems to be a complicated process. Only after you understand the specific installation steps and methods, you will feel that the custom wardrobe installation is not as difficult as imagined. Custom wardrobes need to be tailored to achieve twice the result with half the effort.
1. Preparation stage:
1 expected to arrive
More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.
2 fixing screws
The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.
3 cutting side panels
Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
The reference design experience and the detailed installation process are not acceptable.
2. Installation phase:
1 put the bottom plate
The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.
2 fixed frame
Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.
3 installation top plate
It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.
4 mounting shelf
Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
5 fixed door rail
The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.
6 installation of clothes rail
Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.
The reference design experience and the detailed installation process are not acceptable.
3. Final stage:
1Installing the door leaf
The two sliding doors should be attached to the position of the guide rails. Fix the door leaf first and then fix the guide rails at the bottom side to avoid the phenomenon that the door leaf falls off in the future.
2 adjustment and improvement
After all the installations are completed, make a "full inspection" of the wardrobe. If there is any deviation, adjust it in time.
4, complete the acceptance
Finally, check the wardrobe: Shake the cabinet to see if it is firm and the details are in place.
The PVC Pencil Case can be used to hold pens or other small stationery, which is more convenient to carry than pencil case, more comfortable to handle, and easy to clean. It can pack as many things as possible in the smallest space, which is very popular among students and office workers. , can also be used as a Storage Bag, is a multi-purpose storage supplies.
Jilin Y.F. Imp & Exp Co., Ltd is an exporter and manufacturer (Cang nan Y.F. Stationery & Gift Co., Ltd.)in Creative products, such as Backpack ,Shoulder Bag,Pencil Case, Handbag,Multifunctional Bag. Coin Purse .Cosmetic Bag.Storage bags. File Holder .Canvas handbag and Notebook etc. which is a professional stationery company setting research and development, producing, sales and trade into one. Our company always takes quality, service, efficiency and innovation as our management philosophy. Since our brand Y.F. has been put on the market, the products sell well throughout the country consistently, and be exported to Europe and America,, and South America countries as well as regions, where the product enjoys great customer loyalty and good population. Choose Y.F. is not to choose a batch of stationery, but to choose a commitment and responsibility, Thanks for your attention, support, trust an cooperation. Wish to establish long-term business relationship with you in the near future.
Pvc Pencil Case,New Pencil Box,Nylon Pencil Bag,Custom Pencil Case
Jilin Y.F. Import & Export Co.,Ltd , https://www.jlpencilcase.com