[ Chinese wardrobe net ] At present, the high-end overall wardrobe mainly uses tripolyamine pressure surface medium density fiberboard, which has the advantages of moisture resistance, good internal bonding, acid and alkali resistance and good flame resistance. Generally, high quality panels have a higher surface gloss. The melamine plate is divided into two types, a flat surface and an embossed surface, wherein the cost of the embossed surface is much higher than that of the flat surface (this can be referred to the price of the laminate flooring). In addition, it depends on whether the formaldehyde content of the board is tested and certified by the national authority. There is a kind of low-end product with smooth and bright surface oil, which is the same as the surface of the Pauling board. It is made by spraying a layer of paint film on the substrate board. The scratch resistance, flame resistance and surface layer bonding strength cannot be combined with the melamine. Compared to the surface, the cost of such a 18 PCT board is less than that of a 5 PCT flat melamine sheet. There are also 16 cm panels for cabinets. Most of these wardrobes are produced by non-standardized and small workshops, and the quality is not reliable.
Consumption trap 1: The cabinet cabinet material is shoddy, confused name, and the original brand products are pretending to be non-original products. All of Lai Ke's panels are made of wood-embossed anti-counterfeit markings, which can be eliminated from all links.
Consumption trap 2: The door panel is not thick enough, neglecting the safety of the glass. The thickness of the door panel should be 9 PCT to be easily deformed. The standard thickness of the glass should be 5 cm, but if the decorative piece is clamped with two layers of glass, such as weaving, rattan, etc., since the glass groove is only 9 cm wide, the glass is too thin, and it is easy to leave a safety hazard.
Consumption trap 3: The metal frame is difficult to distinguish, and the metal frame of the material closet door is stolen. The door frame has two kinds of carbon steel and aluminum. Carbon steel is easy to rust, and the rear hanging door wheel will be exposed. Currently, aluminum is the mainstream. Aluminum materials include aluminum-magnesium alloys, aluminum-titanium alloys, and the like. Titanium has high strength, small specific gravity and high price, but consumers cannot distinguish it from the surface. In fact, even aluminum-titanium alloys have the problem of high titanium content. In general, with the fingers, the aluminum-titanium alloy sounds crisp and the metal feels stronger.
At present, Hao Laike Company carries out laser anti-counterfeiting engraving on the materials, attaches the anti-counterfeiting inquiry password, and casts the Lai Ke trademark on each accessory. Their reason is: at least the product identification is not, if the goods are not correct to customers!
Consumption trap four: door wheel smearing oil, exaggerating the service door wheel, ordinary door wheel shell is electroplated, easy to rust, the wheel is made of ordinary engineering plastics, easy to wear.
The high-grade door wheel is made of stainless steel, and the wheels are made of carbon fiberglass (international new high-tech materials). Under the load of 180 kg, it can be pushed and pulled more than 100,000 times. Currently, Fulu and Hao Laike use this fiberglass. Some merchants anointed the door wheel to reduce the sound and cover up the defects, but in the future they will stick a lot of dust and leave behind. Some merchants use ordinary plastic door wheels, but claim that the service life can reach 200,000-300,000 times (10 times / day multiplied by 80 years of life), which is doubtful.
China Laminated Card 3 Flap Folders manufacturer, high quality, at competitive prices, welcome to do business with us.
Paper 3 flap folder,Laminated Card 3 Flap Folders,Elasticated Folder A4,Elasticated 3 Flap Folders Glossy Card,Cardboard with 3 Inner Flaps
MIFIA INDUSTRIAL CO., LTD., , https://www.stationery-manufacturer.com