With its natural and original beauty, solid wood furniture has long been the first choice for consumers when purchasing furniture. However, as time goes by, has your furniture been out of fashion and creeping up with "wrinkles"? Jackie Chan furniture http://cljj.cnjiaju.com/share
Don't worry, as long as you maintain the furniture according to the small series, your solid wood furniture will be “youth foreverâ€.
Keeping the moisture away from the furniture Do not store the solid wood furniture in a room that is too humid, which can cause the furniture to become upset due to moisture, which affects the appearance and shortens the service life.
To prevent this from happening, you must keep the room dry. In the wet summer, you'd better use a thin glue to separate the furniture from the ground, while keeping the wall of the furniture at a distance of 0.5-1 cm from the wall, the problem is solved.
Solid wood furniture does not love the sunshine, animals and plants need to get the warmth of the sun, does solid wood furniture also need to enjoy the sun? Don't think so, the sun will erode the solid wood furniture, solid wood furniture should be placed in a place that is not exposed to sunlight, to avoid long-term exposure of furniture. If the furniture needs to be placed next to the window, it can be fitted with curtains that block the UV rays.
Wipe the furniture to choose the light wax furniture is to wipe frequently, but to remind you, when wiping the furniture, do not use alcohol, gasoline-based solvent to wipe the stains will corrode the furniture. It is best to use wood-colored wooden furniture light wax, spread thinly on the surface of the finish, and then wipe dry with cotton cloth. This can reduce dust and increase gloss.
Keep away from heat sources. Solid wood furniture doesn't like too hot. When choosing the location, avoid contact with hot heat sources such as heating, otherwise the furniture will be hot and cracked, which will affect the appearance.
If it needs to be placed close to the heating, some heat-resistant substances can be used to separate it from the furniture to avoid damage.
Keep it bright and have a coup with a neutral soap and silky warm water (about 1:20) to mix and wipe the surface of solid wood furniture. Wipe with a damp cloth and dry the surface with a dry cloth to reduce the adhesion of stains on the surface of wooden furniture and keep the furniture bright.
Temperature and humidity should be balanced Nowadays, many households have installed air conditioners, which makes the indoor air humidity, temperature and outdoor have many differences. Some furniture will crack, this is due to the loss of moisture in the solid wood, the temperature difference between indoor and outdoor is too large, the expansion and contraction of the wood is too large, and the wood ribs inside are broken due to too dry.
So keep the solid wood home with a certain amount of moisture and keep the humidity inside the air.
Solid wood furniture repair method If the maintenance is not appropriate, the furniture will appear unsightly cracks and scars, affecting the appearance. Keep on, don't look good; throw it, it's a pity.
At this time, it is necessary to make some repairs to the furniture that has already had problems, so that it can return to the original style. Depending on the problem, the repair method is different, you can choose the appropriate repair method according to the problems that arise in your own furniture.
People often don't pay attention to the hot stamping. They often put the bowl containing the hot soup or the cup filled with boiling water directly on the painted solid wood furniture, so that the furniture will have unsightly color burn marks. Don't worry, in this case, you can use a fine cloth to sip a little tea or toilet water and gently wipe it so that the hot marks can be greatly improved.
There are some bumps on the surface, and if there is a baby in the house, when you are not paying attention, he may put a trace on your favorite furniture, and even cause the paint film to fall off. Regret or blame the child has nothing to do, the important thing is to repair: you can use the color pen to repair the color of the furniture, and then the surface is coated with a layer of colorless and transparent nail polish, which can have a good effect.
Cracks and holes appear in the table, chair, and cabinet surface when the furniture is used for a long time. At this time, just look for some useless old books, cut it into crumbs, then add the right amount of alum, boil it with water, and embed it in the seam. It will be very firm after drying. It is also possible to use white glue to evenly adjust the wood chips, embed them in cracks, and polish them with sandpaper after a night, which is simple and economical.
Tilting disc Check Valve we provided with pressure seal type and normally used for high pressure system of industrial pipeline from class 900 to class 2500. Valve size from 4" to 24". The advantages of tilting disc check valve are with lower flowing resistance, energy efficiency as well as long service life.
Tilting Disc Check Valve,Disc Check Valve,Double Check Valve,Tilting Disc Wafer Check Valve
Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com