Nilpeter Label Printer's Guarantee of Success

The development of servo motors has created a new era of transmission technology. In the printing industry, Nilpeter, as a supplier of label printing equipment, has designed and produced MO-Line and FA-Line narrow-web rotary printing presses in all aspects of servo drive. Bosch Rexroth's Synax200 motion control system is used for servo drive control. The Synax200 motion control system was developed by Bosch Rexrot Group for the special requirements of printing machinery. This technology has been successfully applied to Nilpeter equipment. After years of redevelopment and improvement, Nilpeter equipment has become more excellent in performance.


After years of hard work, Nilpeter MO-Line's third-generation platform-based full-servo printing press has attracted widespread attention in the industry. MO-Line provides offset printing with other printing processes, such as flexo, silk screen gravure, bronzing, and continuous printing. The ability to freely combine processes such as line compounding, returns customers with its powerful online processing capabilities.


Let us work together to help customers analyze what kind of equipment can bring the greatest benefits and cost optimization for printing companies.

1. Requirements for label printing:

Get high-quality printing

In the web printing system, all transmissions and transmissions rotate at any time. Rotation causes speed chromatic aberration, so it is required that the equipment maintain accurate synchronization of speed and angular motion speed throughout the entire rotation speed. The application state of printing pressure can be adjusted according to the printing speed characteristics to avoid the color difference caused by the speed difference.

In the dynamic printing pressure of Nilpeter MO-Line, FA-Line, because the machine completely adopts the shaftless transmission technology, no matter whether the speed increases or decreases, the dynamic printing pressure is changed by changing the load of the imprinting engagement point. It still has good printing quality at low speed.

Overprint accuracy and format accuracy

To ensure the accuracy of overprinting, for the unit-type equipment, it is necessary to make the rotation of all the printing units of the equipment have high stability and accurate phase synchronization, and consistent roll paper force, and at the same time must ensure the precise adjustment of the web length. On the Nilpeter MO-Line FA-Line and FB-Line equipment, through the shaftless transmission system, each unit has a high degree of rotation synchronization. At the same time, because the material itself has different winding tension differences, in order to ensure a constant tension, put in The winding unit has a three-level tension control system to eliminate the difference in material winding tension.

Variety of printing materials

For label customers, in order to open up a larger market, this requires the equipment to have a wide range of material adaptability, more and more complex labels, such as in-mold labels, sleeve labels and shrink labels, as well as many types of packaging Materials, these different materials require the printing equipment to have diverse adaptability to the materials. The machine with full servo drive can choose different rotation speeds in the transmission and transmission devices. Therefore, there is no need to replace any mechanical and electrical devices from film to paper jam. So as to ensure that customers have more market share and market potential.

2. Equipment control system requirements

Intelligent control system

In the Nilpeter device concept, there is an intelligent control system in each set of platform technologies. Each group of platform systems constitutes an intelligent control system through network transmission. This system is based on Bosch Rexroth's Synax200 motion control system. On this basis, through the system ID automatic identification technology, various printing processes can be automatically identified, thereby ensuring that all wiring processes are electronically synchronized during the printing process. This function is obtained by Synax200 motion control system through the calculation of the positioning point of the electronic axis, and the parameters are transmitted and distributed to each independent drive system through the fiber loop. The electronic positioning control device on each independent drive system will track and transmit the positioning point in real time. The realization of these functions makes the control of the pre-printing function more precise. Make the operation easier.

Extended control of decentralized electronic equipment

The concept of electrical control system equipment is based on highly flexible control methods and transmission systems. This foundation is the premise of the equipment operating system and maintenance system. Decentralized electronic equipment can detect the operation of each electrical device in real time. If the electrical device is operating abnormally. Decentralized electronic equipment will transfer these abnormal data to the central control computer through the system bus. The corresponding data will be displayed on the visual touch screen running under Windows NT. This will allow the equipment operator to know the equipment status in real time. It also brings great help to equipment maintenance.

Printing Management Center

In the fierce customer-oriented market competition environment, as a printing company, there are both long-form jobs and short-form jobs. In actual production, the conversion of machine jobs requires long printing preparations. In order to facilitate the conversion and operation of jobs, the printing management center came into being. The function of the printing management center is to adjust the machine parameters at any time through the digital handle and store and recall the work orders produced each time. This work order data contains the optimal state of the machine when producing this work. These data will set the equipment status when the work order is stored and recalled.

Through high automation and intelligence to optimize the economic production of label printing machines, through the above analysis labels can be produced at a lower price, and can ensure high printing quality. The combination of decentralized machine control and servo control technology, plus the use of a fully integrated central control system, can meet a higher degree of automation. Finally, we believe that label printing equipment should have the following characteristics:

The printing range of the printing machine is wide. The operation of the machine is simpler, safer and more user-friendly. The operating system and maintenance cost are reduced. The open system can be expanded into the factory automation system in the future. The machine network can be used for remote maintenance and upgrade. Repeated orders can be managed through the database. To reduce standby time

In the current MO-Line, FA-Line, FB-Line servo drive equipment launched by Nilpeter, the above features combined with Nilpete's patented platform technology have enabled greater development of equipment quality and technology applications. At the same time, the support of these technologies is the guarantee of the success of your label printing!

2-people Tent

Zhejiang Shengfa Textiles Printing&Dyeing.,ltd , https://www.chzjsf.com