Four points of choice for panel furniture

Panel furniture now occupies a large market share, and many people love it because its plates are not easily deformed and the colors are diverse. The so-called panel furniture refers to furniture made of artificial panels and hardware. The panel furniture is easy to assemble and disassemble, saves wood and has various colors. It is a variety developed by the furniture industry. When selecting, you should pay attention to the following four aspects:

Select the hardware fittings for the panel furniture

The hardware connector is the most intuitive quality standard. The good hardware should be freely switched, no noise, and the surface coating does not peel off. The hardware of some high-end panel furniture is imported, and the foreign language logo can be found on it. Because the freely disassemblable combination is the biggest advantage of panel furniture, the quality of the hardware connector is very important.
Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings should be high. Plastic parts should be beautiful in appearance and bright in color. The parts of the force should be strong and flexible, and should not be too thin. The open connection requires flexible rotation so that the furniture will be smooth, easy and free of friction when it is opened.
Board furniture selection, two look at the edge of the veneer
Look carefully, the quality of the edge will largely affect the quality of the furniture. The first is the pros and cons of the edge-sealing material, and secondly, it is necessary to pay attention to whether the edge-sealing is uneven or tilted. Good edge sealing should be tightly stitched with the entire piece.
The veneer material has a great influence on the furniture grade. To touch the surface paint film, the general high-grade panel furniture is solid wood veneer, the middle file is paper veneer, and the price is lower at one time and the surface is rubber veneer. Among them, the paper veneer has different grades due to different processing techniques.
Plate furniture selection three to see the quality of the plate
Carefully check whether the glue on the side and surface of the board is evenly coated, whether the bond is firm, whether the trimming is smooth and smooth, and whether the end face of the visible part such as the side plate of the component, the door panel, the drawer panel, etc. is edge-sealed. The well-decorated sheet has no trace of adhesion on the edge.
Assembling the assembly mainly depends on whether the hole at the hole is exquisite and tidy. Whether the connector is firm after installation, whether there is a gap between the plane and the end face, and there is no looseness in the hand.
Panel furniture selection four look size
At present, the furniture market mainly focuses on complete sets of bedroom furniture and office furniture, as well as multi-functional film and television electrical cabinets and other products. National standards for the main dimensions of furniture are subject to regulatory requirements.
For example, the depth of the space in the hanging wardrobe should be 530 mm or more, the height of the table furniture should be 680 mm to 760 mm, and the clearance height between the bookcase layers should be 230 mm to 310 mm.
Consumers need to understand these main dimensions most, because if the furniture is smaller than the specified size, it will cause a lot of inconvenience when used. If the depth of the large wardrobe space is too small, it will affect the hanging clothes, causing the door to close.

PP File

Pp File,Pp Plastic File,School Pp Plastic File,A4 Pp Plastic File

TAISHAN JINRI STATIONERY PLASTIC CO.,LTD , https://www.jinri-folder.com