Blower maintenance requires attention to three details

One, feeding position without material: need to check several situations: whether the hopper has no material, if it is: need to hurry to feed, if not, please check the elevator control contactor is in the power state, if it is the power state , Check to see if the motor is energized and loaded. This is because it is likely that the preform has jammed the lifting belt. The easiest way to do this is to manually assist in lifting. If it is checked that the control contactor of the hoist is not in the power-on state, check that the preform inspection sensor eyes are not on the same line as the reflector.

Second, feeding the old card feeding tray: This situation is a headache, from the experience point of view if the length of the preform (embryo) is relatively long and heavy, then this phenomenon is relatively small.

Third, the bottle can not be removed from the mold after blowing.

Disposable Tableware

Disposable Tableware,Icecream Stick,Disposable Icecream Stick,Icecream Spoon

dalian shengfeng doors co.,LTD , https://www.ytldisposablegoods.com